Rex has 4 locations in the North East
With 4 locations, Rex Lumber Company is Here to Serve You.
Rex has 4 locations in the North East
Stand Out From the Crowd. If it's Not Custom it's Not Rex.
Rex has 4 locations in the North East
We Can Finish Anything We Start.
Rex has 4 locations in the North East
Let Us Remanufacture Your Old Dormant Inventory.

Grade:

Thickness:

Species:

Millwork Addons:

Flooring

Which would you rather walk on?

Custom Premium Wide Plank Flooring


A beautiful natural choice that adds character, warmth and elegance to any space. Re-finishable and long-lasting

Typical Strip Flooring


A narrow, standard strip floor with many pieces less than 1' in length that looks manufactured and artificial. Pre-Finished versions often result in numerous uneven dips between strips that can trap dirt.

Rex Lumber Company makes custom flooring to order to your specifications.

Custom T & G flooring widths are available from 3/4” accent strips up to 10-1/4 (10” face) end matched, and 11-1/4” (11” face) not

end matched

. Square edge flooring with ripped edges can be made wider.

Our wide plank flooring typically runs 3’ to 12’, with 60%+ 8’ to 12’. Longer lengths may be available depending on the specie.

Our standard T & G “butt” pattern with backout and relief matches our end match profile.

Other patterns such as micro bevel, center match, and v-joints are also available

Flooring can be run in any of the species in our extensive and diverse kiln dried inventory, including FSC® Certified stock. Some of the most popular species we have available are:

Ash Beech Birch Cherry
Hickory Hard Maple Red Oak White Oak
Eastern White Pine Yellow Pine Walnut Bubinga
Jatoba Santos Mahogany South American
Mahogany
Sapele
Red Grandis Eucalyptus Cumaru Ipe’ Wenge

Rustic, antique and reclaimed species are available including,:

Wormy Chestnut Heart pine Antique or Rustic Oak
Reclaimed Douglas Fir Reclaimed Hemlock  

Although Rex Lumber Company can make any size and type of flooring, we specialize in wide plank, long length product.

The three standard grades that comprise most of what we manufacture are:

 

Rex Select Grade

Is produced from FAS/Sel & Btr grade lumber.

It is 3’ to 12’ in length, which is heavy 6 to 10’, with up to 5% cutbacks to 30”.

Stock is available as both Trimmed Ends and End Matched.

The “face” may contain:

  • Color variations due to differences between heartwood and sapwood.
  • Unlimited sound sapwood.
  • Natural color variations in heartwood.

Not permitted on “face”:

  • End splits or heavy surface checks.
  • Excessive dark mineral stain, sapwood stain, sticker stain, and / or pin wormholes.
  • Skip, voids, chip out on groove edge.
  • Open knots over ½”, holes, defects, deep chipping and / or excessive tearout.
  • Wane on face or edge.

*Some spot filling for open characters is generally required.

 

Rex Character Grade

Is produced from custom sawn lumber with mostly sound defects and “character marks” distributed over the face.

It is 3’ to 12’ in length, which is heavy 6 to 10’, with up to 5% cutbacks to 30”.

Stock is available as both Trimmed Ends and End Matched.

The “face” may contain:

  • Unlimited sound knots and burls.
  • Small “character” checks and splits 1/16” wide x 1 to 2” long.
  • Color variations due to differences between heartwood and sapwood.
  • Unlimited sound sapwood.
  • Natural color variations in heartwood.
  • Light to moderate skip/hit or miss planing.
  • Slight imperfections in milling (light tear out that is less than 1/32” deep, ½ tongue.)
  • Small open knots/burls ½” diameter or less.*
  • Pinworm and grub holes, burls, mineral streak, light checks, stain.

Not permitted on “face”

  • End splits or heavy surface checks.
  • Moderate to heavy sticker stain.
  • Skip, voids, chip out on groove side.
  • Open knots over ½” holes, defects and deep chipping.
  • Wane.

*Some spot filling for open characters is generally required.

 

Rip & Run-Product of the Grade

Is produced from #1 Common or FAS/Sel & Btr grade lumber, depending on the end users needs.

It is 3’ and longer in length, which is heavy 6 to 10’, with up to 5% cutbacks to 30”.

Stock is not Trimmed and is not End Matched.

  • All defects that are allowed in NHLA lumber grade are shipped.
  • Customer responsible for all defecting and end trimming.
  • Selective trimming done only to avoid breakups in machines.

Stock accessory mouldings are available in numerous profiles and various species. They are:

Reducer Strips

Thresholds

Nosing

Saddles

T-moulding

Carpet Strips

Our stock accessory mouldings can be viewed in our online moulding catalog by checking the Flooring category

Accent strips are available in all species offered, some of the more common species are:

South American Mahogany

Santos Mahogany

Peruvian Walnut

Jatoba

Hard Maple

Padauk

Bubinga

Wenge

American walnut

Pre-Finished flooring options are available.

Rex Lumber Company is a member of NWFA- National Wood Flooring Association. As a member of NWFA we have access to NWFA’s vast technically libraries and expertise.

National Wood Flooring Association logo

**Wholesale to the Trade Only**